22 resultados para Service Quality, Repurchase Intent, Customer Satisfaction
em Universidad Politécnica de Madrid
Resumo:
Customer Satisfaction Surveys (CSS) have become an important tool for public transport planners, as improvements in the perceived quality of service lead to greater use of public transport and lower traffic pollution. Until now, Intelligent Transportation System (ITS) enhancements in public transport have traditionally included fleet management systems based on Automatic Vehicle Location (AVL) technologies, which can be used to optimize routing and scheduling, and to feed real-time information into passenger information channels. However, surveys of public transport users could also benefit from the new information technologies. As most customers carry their smartphones when traveling, Quick Response (QR) codes open up the possibility of conducting these surveys at a lower cost.This paper contributes to the limited existing literature by developing the analysis of QR codes applied to CSS in public transport and highlighting their importance in reducing the cost of data collection and processing. The added value of this research is that it provides the first assessment of a real case study in Madrid (Spain) using QR codes for this purpose. This pilot experience was part of a research project analyzing bus service quality in the same case study, so the QR code survey (155 valid questionnaires) was validated using a conventional face-to-face survey (520 valid questionnaires). The results show clearly that, after overcoming a few teething troubles, this QR code application will ultimately provide transport management with a useful tool to reduce survey costs
Resumo:
Quality of service (QoS) can be a critical element for achieving the business goals of a service provider, for the acceptance of a service by the user, or for guaranteeing service characteristics in a composition of services, where a service is defined as either a software or a software-support (i.e., infrastructural) service which is available on any type of network or electronic channel. The goal of this article is to compare the approaches to QoS description in the literature, where several models and metamodels are included. consider a large spectrum of models and metamodels to describe service quality, ranging from ontological approaches to define quality measures, metrics, and dimensions, to metamodels enabling the specification of quality-based service requirements and capabilities as well as of SLAs (Service-Level Agreements) and SLA templates for service provisioning. Our survey is performed by inspecting the characteristics of the available approaches to reveal which are the consolidated ones and which are the ones specific to given aspects and to analyze where the need for further research and investigation lies. The approaches here illustrated have been selected based on a systematic review of conference proceedings and journals spanning various research areas in computer science and engineering, including: distributed, information, and telecommunication systems, networks and security, and service-oriented and grid computing.
Resumo:
La planificación y las políticas de transporte no pueden descuidar la calidad del servicio, considerando que influye notablemente en el cambio modal del coche hacia otros medios de transporte más sostenibles. El concepto se aplica también a los intercambiadores de transporte público, los nodos del sistema donde se cruzan las distintas redes del transporte público y privado. Aunque se han logrado numerosos avances para medir y evaluar la calidad en el sector del transporte público, se han dedicado relativamente pocos esfuerzos a investigar estos aspectos relacionados con la calidad de los intercambiadores del transporte público. Este trabajo de investigación se concentra en la calidad del servicio de la transferencia modal en los intercambiadores interurbanos, según la perspectiva de los viajeros. Su objetivo es identificar los factores clave de la calidad del servicio y los perfiles de los viajeros en los intercambiadores. La investigación es exploratoria y ofrece información acerca de la percepción de los viajeros intermodales relacionada con los aspectos de la calidad, aportando nuevos elementos y datos para adentrarse en estudios más detallados. La metodología del trabajo combina técnicas de análisis estadístico multivariante para analizar los datos de las encuestas sobre la satisfacción de los clientes y se subdivide en tres etapas. En primer lugar, se ha implementado el análisis de correspondencias múltiples para explorar los constructos latentes relacionados con la satisfacción de las características cualitativas de los intercambiadores interurbanos, identificando así los factores clave de la calidad. En segundo lugar, se ha aplicado un análisis de conglomerados de k-medias sobre los factores clave de calidad para clasificar a los viajeros en grupos de usuarios de transportes homogéneos, de acuerdo con su percepción de satisfacción, identificando de este modo los perfiles de los viajeros. Por último, se han formulado sugerencias y recomendaciones sobre la calidad para respaldar la formulación de políticas, estableciendo las prioridades para los intercambiadores interurbanos. La metodología se aplicó en cuatro intercambiadores interurbanos (estaciones de ferrocarriles o de autobuses ) en Madrid, Zaragoza, Gothenburg y Lion, analizando los datos recogidos mediante una encuesta de satisfacción del cliente llevada a cabo en 2011 en los cuatro casos de estudio, donde se interconectan distintos medios de transporte público y privado, de corta y larga distancia. Se recogieron datos sobre la satisfacción de los viajeros con 26 criterios de calidad, así como información sobre aspectos socio-económicos y pautas de comportamiento de viajes. Mediante el análisis de correspondencias múltiples se identificaron 4-5 factores clave de calidad en cada intercambiador, que se asocian principalmente con el sistema de emisión de billetes, el confort y la interconexión, mientras que los viajeros no perciben los temas clásicos como la información. Mediante el análisis de conglomerados se identificaron 2-5 perfiles de viajeros en cada intercambiador. Se reconocieron dos grupos de viajeros en casi todos los casos de estudio: viajeros de cercanía/trabajadores y turistas. Por lo que concierne a las prioridades para apoyar a las partes interesadas en la formulación de políticas, la expedición de billetes es el factor clave para los intercambiadores interurbanos españoles, mientras que la interconexión y los aspectos temporales se destacan en los intercambiadores de Francia y Suecia. Quality of Service can not be neglected in public transport planning and policy making, since it strongly influences modal shifts from car to more sustainable modes. This concept is also related to Public Transport interchanges, the nodes of the transport system where the different sub-systems of public passenger transport and personal vehicles meet. Although a lot of progress has been generally done to measure and assess quality in public transport sector, relatively little investigation has been conducted on quality at PT interchanges. This research work focusses on Quality of Service in the use of transfer facilities at interurban interchanges, according to current travellers’ perspective. It aims at identifying key quality factors and travellers profiles at interurban interchanges. The research is exploratory and offers insight into intermodal travellers’ perception on quality aspects, providing new elements and inputs for more definitive investigation. The methodology of the work combines multivariate statistical techniques to analyse data from customer satisfaction surveys and is subdivided in three steps. Firstly, multiple correspondence analysis was performed to explore latent constructs as concern satisfaction of quality attributes at interurban interchanges, thus identifying the so-called Key Quality Factor. Secondly, k-means cluster analysis was implemented on the key quality factors to classify travellers in homogeneous groups of transport users, according to their perception of satisfaction, thus identifying the so-called Travellers Profiles. Finally, hints and recommendations on quality were identified to support policy making, setting priorities for interurban interchanges. The methodology was applied at four interurban interchanges in Madrid, Zaragoza, Gothenburg and Lyon, analysing the data collected through a customer satisfaction survey carried out in 2011 at the four railway or bus stations where different modes of public and private transport are interconnected covering both short and long trips. Data on travellers’ satisfaction with 26 quality attributes were collected, as well as information on socio-economical and travel patterns. Through multiple correspondence analysis were identified 4-5 key quality factors per interchange. They are mainly related to ticketing, comfort and connectivity, while classical issues, as information, are not perceived as important by travellers’. Through cluster analysis were identified 2-5 travellers profiles per interchange. Two groups of travellers can be found in almost all case studies: commuter / business travellers and holiday travellers. As regards the priorities to support stakeholders in policy making, ticketing is the key-issue for the Spanish interurban interchanges, while connectivity and temporal issues emerge in the French and Swedish case studies.
Resumo:
Quality of service should not be overlooked in public transport planning and policy making, as it influences modal shift from car use to more sustainable means. Little research has been conducted on the quality of public transport interchanges from the perspective of current travellers (i.e. perceived quality). This work is thus aimed at identifying key quality factors in urban interchanges, through an exploratory approach (multiple correspondence analysis) that provides novel elements for further research. The methodology was applied at interchanges in Madrid and Gothenburg and the data used in the analysis were collected through customer satisfaction surveys conducted in 2011. The analysis identified five key quality factors per interchange. Ticketing plays a key role at both interchanges while physical and environmental issues emerged at Avenida de America in Madrid, and services, temporal issues and interconnectivity characterise Gothenburg central station. Compared with other quality aspects, classical issues such as safety/security and information are not perceived as important by intermodal travellers.
Resumo:
The study of service quality and its implication for transport contracts has several approaches in research and practical applications, where the main emphasis is the consideration of quality from the user's point of view, thus obtaining a customer satisfaction index as a measurement of the overall quality with no further implications for service providers. The main aim of this paper is to estimate the real economic impact of improving quality attributes for a bus operator. An application of the activity-based costing methodology is developed for a bus contract in Madrid, using quality data from surveys together with economic and performance information, and focusing on headway as a quality variable. Results show the consistency and practicality of this methodology, overcoming simplifications from traditional procedures. This method is a powerful tool in quality-based contracting as well as for effective investment in transport quality under poverty funding constraints
Resumo:
The demand of new services, the emergence of new business models, insufficient innovation, underestimation of customer loyalty and reluctance to adopt new management are evidence of the deficiencies and the lack of research about the relations between patients and dental clinics. In this article we propose the structure of a model of Relationship Marketing (RM) in the dental clinic that integrates information from SERVQUAL, Customer Loyalty (CL) and activities of RM and combines the vision of dentist and patient. The first pilot study on dentists showed that: they recognize the value of maintaining better patients however they don't perform RM actions to retain them. They have databases of patients but not sophisticated enough as compared to RM tools. They perceive that the patients value "Assurance" and "Empathy" (two dimensions of service quality). Finally, they indicate that a loyal patient not necessarily pays more by the service. The proposed model will be validated using Fuzzy Logic simulation and the ultimate goal of this research line is contributing a new definition of CL.
Resumo:
El presente texto se ha desarrollado como Proyecto Fin de Grado en la Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación de la Universidad Politécnica de Madrid en colaboración con la Consultora Tecnológica everis. El mismo tiene como objetivo realizar un estudio de los requisitos necesarios para poder desplegar un servicio que permita ofrecer a las Operadoras Móviles Virtuales (OMV) soporte técnico a sus clientes a través de las redes sociales. Este módulo establecerá una nueva vía de comunicación entre el consumidor y el cliente de la OMV con la propia OMV, el cual se caracterizará por una alta accesibilidad y una gran rapidez en el servicio permitiendo de este modo, una mayor satisfacción del cliente con su operador móvil y por tanto de una nueva vía para conseguir la fidelización del mismo y la captación de nuevos clientes. Para ello, este proyecto se lleva a cabo sobre el sistema de información 4mobile el cual es comercializado por la mencionada Consultora Tecnológica. Este sistema consiste en una plataforma web la cual permite cubrir todos los procesos de negocio comunes que un OMV necesita gestionar. Es por ello, que el mencionado estudio se centra en la evaluación de los aspectos necesarios para la integración de un módulo de estas características dentro de la plataforma de 4mobile. Este módulo, estará basado en una herramienta software que permitirá gestionar el ciclo de vida completo del comentario realizado por el cliente a través de una red social, desde que es publicado por el cliente, hasta que se haya respondido al mismo y su solución sea considerada como satisfactoria por el cliente. Por ello, y de cara a definir correctamente esta herramienta, será necesario un detallado análisis el cual recoja diversos aspectos y que a lo largo del texto, será denominado como Plan de Marketing de Medios Sociales (PMMS). Estos aspectos versarán tanto de las necesidades tecnológicas para su mencionada integración, como de la serie de características funcionales que una solución basada en servicio técnico a través de las redes sociales deberá poseer con el objetivo de ofrecer un servicio técnico de calidad. Finalmente, estas funcionalidades y necesidades tecnológicas se expondrán en forma de propuesta a everis para su integración en la plataforma 4mobile junto con un análisis de diseño a alto nivel software de la solución a desarrollar. ABSTRACT. This text has been developed as Final Degree Project in the Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación de la Universidad Politécnica de Madrid in collaboration with the Technology Consultant everis, aims to conduct a study of how to provide technical support through social networks and the evaluation of the integration of a social support module within the system platform 4mobile, which cover all business processes that need to manage a Mobile Virtual Network Operator (MVNO), which is marketed by above-mentioned consultant . This module will establish a new communication channel between the consumer and the client with the OMV and itself, which is characterized by high accessibility and great fast service. Thus will allow a higher customer satisfaction with him service and thus a new way to get the same loyalty and attract new customers To this end, this project is performed on the information system 4mobile which is marketed by the consulting part thereof everis. This system is a platform to cover all business processes that need to manage an MVNO. Therefore, the mentioned study focuses on the evaluation of the elements necessary for integrating module these features within the platform 4mobile. This module will be based on a software tool for managing the entire lifecycle of the comment made by the customer via social networking, from the moment it is published, until it has been respond and their solution is considered satisfactory for the customer. So, in order to properly define this tool, a detailed analysis which will be necessary to collect various aspects and throughout the text, it will be referred to as Plan of Social Media Marketing (PMMS). These aspects will be address both: the technological needs for the mentioned integration, and the number of functional characteristics-based service through social networking solution, as this must in order to provide a quality service Finally, these goals and requirements will be discussed as everis offer for integration into the platform 4mobile analysis along with a high level of software design to develop the solution.
Resumo:
This paper reports the results of the assessment of a range of measures implemented in bus systems in five European cities to improve the use of public transport by increasing its attractiveness and enhancing its image in urban areas. This research was conducted as part of the EBSF project (European Bus System of the Future) from 2008 to 2012. New buses (prototypes), new vehicle and infrastructure technologies, and operational best practices were introduced, all of which were combined in a system approach. The measures were assessed using multicriteria analysis to simultaneously evaluate a certain number of criteria that need to be aggregated. Each criterion is measured by one or more key performance indicators (KPI) calculated in two scenarios (reference scenario, with no measure implemented; and project scenario, with the implementation of some measures), in order to evaluate the difference in the KPI performance between the reference and project scenario. The results indicate that the measures produce a greater benefit in issues related to bus system productivity and customer satisfaction, with the greatest impact on aspects of perceptions of comfort, cleanliness and quality of service, information to passengers and environmental issues. The study also reveals that the implementation of several measures has greater social utility than very specific and isolated measures.
Resumo:
La aproximación de las organizaciones a la mejora de sus procesos ha venido por distintos caminos. Muchas Administraciones Públicas se acercaron a este universo a través del modelo EFQM de calidad y excelencia que surgió en la década de los 80 y que sirvió como referente en el ámbito de la Unión Europea como vía de autoevaluación y determinación de procesos de mejora continua. Está basado en la identificación de los puntos fuertes y débiles aplicados a diferentes ámbitos de la organización, siendo éstos el punto de partida para el proceso de mejora continua. Se trata de un modelo en el que puedes decir que estás en calidad aunque tu puntuación sea muy pequeña, por lo que, por imagen, muchas empresas públicas empezaron a implantarlo. La empresa privada sin embargo se decantó por los sistemas de calidad basados en normas ISO. En estos sistemas has de tener un nivel mínimo para poder exhibir una certificación o acreditación del sistema de calidad. La más extendida es la ISO 9001:2008 ya que es válida para todo tipo de empresa. Este sistema se centra en la satisfacción del cliente y está basada en gran medida en el PDCA, acrónimo de Plan, Do, Check, Act (Planificar, Hacer, Verificar y Actuar). Al tratarse de sistemas documentados, pasados los años se llega a la misma conclusión, aquellas empresas que simplemente tienen un certificado colgado en la pared y que arreglan los papeles antes de la auditoría no tienen nada que aporte valor añadido a la empresa y se autoengañan. La potencia de todo sistema de gestión de calidad reside en aprovechar el potencial de sus recursos humanos dirigiendo los recursos de la empresa de forma eficiente y haciendo participe de los objetivos de la organización a su personal para que se impliquen y sepan que se espera de cada uno. La formación de ingeniero siempre nos hace ser críticos con los modelos existentes y tratar de buscar caminos alternativos que sean más eficientes. Para ello es necesario tener un conocimiento muy preciso de la organización. Por ello, después de más de cinco años trabajando en la Organización, desempeñando diversos cometidos, analizando diferentes esferas de actuación y tras estudiar informes de diferentes organizaciones que supervisan el funcionamiento de la empresa me di cuenta que la Dirección General de la Marina Mercante podía cambiar de forma de actuar para modernizarse y ser más transparente, eficaz y eficiente. Esta tesis versa sobre la posibilidad de implantar un nuevo servicio en la Dirección General de la Marina Mercante que le permita mejorar su competitividad a nivel mundial, como estado de abanderamiento, y que, dentro de nuestras fronteras, haga que sus servicios se reorienten aprovechando el conocimiento de su personal, teniendo en cuenta las necesidades de sus usuarios y los recursos de la Organización. Las cartas de servicio permiten acercar al ciudadano al funcionamiento de la organización. Le informa de las condiciones en las que se presta el servicio, los compromisos de la empresa y la forma en la que puede participar para mejorarlos, entre otros. Por otra parte, la empresa no necesita previamente tener ningún sistema de calidad implantado, aunque, como veremos en el capítulo tres y cuatro siempre ayuda a la hora de tener sistemas de aseguramiento implantados. En el capítulo seis se detallan los objetivos que se lograrían con la implantación de las cartas de servicio en la DGMM y en el capítulo siete se discuten dichos resultados y conclusiones. ABSTRACT Different ways have been used by organizations to approach process improvement. Many Public Administrations chose quality and excellence EFQM model for that approachment. This quality program began in 80 decade and that it was the Europe Unión reference to continuous improvement autoevaluation and determination. It is based on strong and weak points of different organization fields, and they are considered as starting point for continuous improvement. This model allows enterprises to say that they are working on a quality scheme even though their score is very little, and this was why a lot of Public Administrations began using it. Nevertheless private enterprises chose quality management systems based on ISO standards. In these systems there is a threshold you must have to be able to have a certification or an accreditation of quality management system. ISO 9001:2008 is the standard most used because of it can be applied to a great range of enterprises. This system is focused on customer satisfaction and it is based on PDCA, Plan, Do, Check, Act. All these systems are documented ones, so once time goes by the same conclusion is reached: enterprises that have the certificate hung on the wall and that papers are fixed for audits have nothing that give them added value and they self-delusion. Quality management system power is related to the usage of human resources potential to lead enterprise resources efficiently and to make them participate in organization objectives. Naval architect training makes them to be critic with existing models and to try to find alternative ways to be more efficient. To achieve this goal, a precise knowledge of the organization is needed. That is the reason why, after five years in quality related issues in the Organization, in different chores, analyzing our scope and reports of organizations that supervise our operation, I realized that Merchant Marine Directorate could change the way of operation to modernize and be more transparent, efficient and effective. This thesis is about the possibility of implantation of a new service in Merchant Marine Directorate that will make it possible to improve their worldwide competitiveness as Flag State, and that to reorient all services taking into account citizens needs and Organization resources. Citizen’s charters able approachment to organization operation. It gives the following information: which are terms in which service is given, enterprise compromises, ways in which citizen can collaborate to improve them, and etc. Additionally, no quality management system is needed to be implemented. Although we’ll see in chapter three and four that having it is of great help. In chapter six are detailed goals achieved if citizen’s charters are implemented in Merchant Marine Directorate, and in chapter seven conclusions and results are discussed.
Resumo:
Esta tesis doctoral propone un modelo de comportamiento del paciente de la clínica dental, basado en la percepción de la calidad del servicio (SERVQUAL), la fidelización del paciente, acciones de Marketing Relacional y aspectos socioeconómicos relevantes, de los pacientes de clínicas dentales. En particular, el estudio de campo se lleva a cabo en el ámbito geográfico de la Comunidad de Madrid, España, durante los años 2012 y 2013. La primera parte del proceso de elaboración del modelo está basada en la recolección de datos. Para ello, se realizaron cinco entrevistas a expertos dentistas y se aplicaron dos tipos encuestas diferentes: una para el universo formado por el conjunto de los pacientes de las clínicas dentales y la otra para el universo formado el conjunto de los dentistas de las clínicas dentales de la Comunidad de Madrid. Se obtuvo muestras de: 200 encuestas de pacientes y 220 encuestas de dentistas activos colegiados en el Ilustre Colegio Oficial de Odontólogos y Estomatólogos de la I Región Madrid. En la segunda parte de la elaboración del modelo, se realizó el análisis de los datos, la inducción y síntesis del modelo propuesto. Se utilizó la metodología de modelos gráficos probabilísticos, específicamente, una Red Bayesiana, donde se integraron variables (nodos) y sus dependencias estadísticas causales (arcos dirigidos), que representan el conocimiento obtenido de los datos recopilados en las encuestas y el conocimiento derivado de investigaciones precedentes en el área. Se obtuvo una Red Bayesiana compuesta por 6 nodos principales, de los cuales dos de ellos son nodos de observación directa: “Revisit Intention” y “SERVQUAL”, y los otros cuatro nodos restantes son submodelos (agrupaciones de variables), estos son respectivamente: “Attitudinal”, “Disease Information”, “Socioeconomical” y “Services”. Entre las conclusiones principales derivadas del uso del modelo, como herramientas de inferencia y los análisis de las entrevistas realizadas se obtiene que: (i) las variables del nodo “Attitudinal” (submodelo), son las más sensibles y significativas. Al realizarse imputaciones particulares en las variables que conforman el nodo “Attitudinal” (“RelationalMk”, “Satisfaction”, “Recommendation” y “Friendship”) se obtienen altas probabilidades a posteriori en la fidelidad del paciente de la clínica dental, medida por su intención de revisita. (ii) En el nodo “Disease Information” (submodelo) se destaca la relación de dependencia causal cuando se imputa la variable “Perception of disease” en “SERVQUAL”, demostrando que la percepción de la gravedad del paciente condiciona significativamente la percepción de la calidad del servicio del paciente. Como ejemplo destacado, si se realiza una imputación en la variable “Clinic_Type” se obtienen altas probabilidades a posteriori de las variables “SERVQUAL” y “Revisit Intention”, lo que evidencia, que el tipo de clínica dental influye significativamente en la percepción de la calidad del servicio y en la fidelidad del paciente (intención de revisita). (iii) En el nodo “Socioeconomical” (submodelo) la variable “Sex” resultó no ser significativa cuando se le imputaban diferentes valores, por el contrario, la variable “Age” e “Income” mostraban altas variabilidades en las probabilidades a posteriori cuando se imputaba alguna variable del submodelo “Services”, lo que evidencia, que estas variables condicionan la intención de contratar servicios (“Services”), sobretodo en las franjas de edad de 30 a 51 años en pacientes con ingresos entre 3000€ y 4000€. (iv) En el nodo “Services” (submodelo) los pacientes de las clínicas dentales mostraron altas probabilidades a priori para contratar servicios de fisiotrapia oral y gingival: “Dental Health Education” y “Parking”. (v) Las variables de fidelidad del paciente medidas desde su perspectiva comportamental que fueron utilizadas en el modelo: “Visit/year” “Time_clinic”, no aportaron información significativa. Tampoco, la variable de fidelidad del cliente (actitudinal): “Churn Efford”. (vi) De las entrevistas realizadas a expertos dentistas se obtiene que, los propietarios de la clínica tradicional tienen poca disposición a implementar nuevas estrategias comerciales, debido a la falta de formación en la gestión comercial y por falta de recursos y herramientas. Existe un rechazo generalizado hacia los nuevos modelos de negocios de clínicas dentales, especialmente en las franquicias y en lo que a políticas comerciales se refiere. Esto evidencia una carencia de gerencia empresarial en el sector. Como líneas futuras de investigación, se propone profundizar en algunas relaciones de dependencia (causales) como SERVQUALServices; SatisfactionServices; RelationalMKServices, Perception of diseaseSatisfaction, entre otras. Así como, otras variables de medición de la fidelidad comportamental que contribuyan a la mejora del modelo, como por ej. Gasto del paciente y rentabilidad de la visita. ABSTRACT This doctoral dissertation proposes a model of the behavior of the dental-clinic customer, based on the service-quality perception (SERVQUAL), loyalty, Relational Marketing and some relevant socio-economical characteristics, of the dental-clinic customers. In particular, the field study has been developed in the geographical region of Madrid, Spain during the years 2012 and 2013. The first stage of the preparation of the model consist in the data gathering process. For this purpose, five interviews where realized to expert dentists and also two different types of surveys: one for the universe defined by the set of dental-clinic patients and the second for the universe defined by the set of the dentists of the dental clinics of the Madrid Community. A sample of 200 surveys where collected for patients and a sample of 220 surveys where collected from active dentists belonging to the Ilustre Colegio Oficial de Odontólogos y Estomatólogos de la I Región Madrid. In the second stage of the model preparation, the processes of data-analysis, induction and synthesis of the final model where performed. The Graphic Probabilistic Models methodology was used to elaborate the final model, specifically, a Bayesian Network, where the variables (nodes) and their statistical and causal dependencies where integrated and modeled, representing thus, the obtained knowledge from the data obtained by the surveys and the scientific knowledge derived from previous research in the field. A Bayesian Net consisting on six principal nodes was obtained, of which two of them are directly observable: “Revisit Intention” y “SERVQUAL”, and the remaining four are submodels (a grouping of variables). These are: “Attitudinal”, “Disease Information”, “Socioeconomical” and “Services”. The main conclusions derived from the model, as an inference tool, and the analysis of the interviews are: (i) the variables inside the “Attitudinal” node are the most sensitive and significant. By making some particular imputations on the variables that conform the “Attitudinal” node (“RelationalMk”, “Satisfaction”, “Recommendation” y “Friendship”), high posterior probabilities (measured in revisit intention) are obtained for the loyalty of the dental-clinic patient. (ii) In the “Disease Information” node, the causal relation between the “Perception of disease” and “SERVQUAL” when “Perception of disease” is imputed is highlighted, showing that the perception of the severity of the patient’s disease conditions significantly the perception of service quality. As an example, by imputing some particular values to the “Clinic_Type” node high posterior probabilities are obtained for the “SERVQUAL” variables and for “Revisit Intention” showing that the clinic type influences significantly in the service quality perception and loyalty (revisit intention). (iii) In the “Socioeconomical” variable, the variable “Sex” showed to be non-significant, however, the “Age” variable and “Income” show high variability in its posterior probabilities when some variable from the “Services” node where imputed, showing thus, that these variables condition the intention to buy new services (“Services”), especially in the age range from 30 to 50 years in patients with incomes between 3000€ and 4000€. (iv) In the “Services” submodel the dental-clinic patients show high priors to buy services such as oral and gingival therapy, Dental Health Education and “Parking” service. (v) The obtained loyalty measures, from the behavioral perspective, “Visit/year” and “Time_clinic”, do not add significant information to the model. Neither the attitudinal loyalty component “Churn Efford”. (vi) From the interviews realized to the expert dentists it is observed that the owners of the traditional clinics have a low propensity to apply new commercial strategies due to a lack of resources and tools. In general, there exists an opposition to new business models in the sector, especially to the franchise dental model. All of this evidences a lack in business management in the sector. As future lines of research, a deep look into some statistical and causal relations is proposed, such as: SERVQUALServices; SatisfactionServices; RelationalMKServices, Perception of diseaseSatisfaction, as well as new measurement variables related to attitudinal loyalty that contribute to improve the model, for example, profit per patient and per visit.
Resumo:
El estudio de la calidad de servicio en transporte público ha tenido distintos enfoques, tanto en la investigación como en sus aplicaciones prácticas, tales como el desarrollo del método SERVQUAL, los proyectos QUATTRO y EQUIP de la Comisión Europea, el Transit Capacity and Quality of Service Manual y finalmente el estándar EN 13816, siendo la consideración principal la calidad desde el punto de vista del usuario, es decir, la calidad percibida, cuyo objetivo en la práctica trata de obtener un Índice de Satisfacción del Cliente como medida de la calidad global. Esta aproximación deja de lado aspectos tanto sobre calidad suministrada como sobre los suministradores del servicio, las administraciones y los operadores, particularmente en cuanto a las implicaciones económicas. El objetivo principal de la presente tesis es la estimación del impacto económico real de la mejora de atributos de calidad para un operador de autobús urbano. En el capítulo 2, se lleva a cabo un análisis del estado del arte sobre el estudio de la calidad, tanto de los métodos de estudio, como de su aplicación al campo de transporte público, y, específicamente, del estudio de costes. En los capítulos 3 y 4 se propone la aplicación de la metodología ABC (Activity Based Costing) para el caso de un contrato de servicio de transporte público en autobús en la Comunidad de Madrid, concretamente la conexión de Tres Cantos. Para ello se utilizan datos de encuestas de calidad esperada y percibida por los usuarios, junto con información económica y de actividad, así como entrevistas a personal de la empresa, conformando todo ello una metodología compacta de investigación y análisis. Los resultados de las encuestas y los análisis posteriores identificaron la frecuencia de servicio, la puntualidad de los autobuses y la seguridad de la conducción como las tres variables mas importantes desde el punto de vista del usuario, y ha sido en referencia a estas tres variables sobre las que se ha desarrollado la aplicación del método ABC contenida en el capítulo 5. Los resultados descritos en el capítulo 6 muestran la consistencia y la aplicabilidad de esta metodología, superando las simplificaciones de los procedimientos tradicionales contables. En cuanto a los resultados obtenidos, se ha comprobado que una aproximación tradicional basada en costes por kilometro puede llegar a sobrevalorar los costes asociados a mejoras de calidad hasta tres veces los costes calculados según el método ABC. Finalmente en el capítulo 7 se recogen las principales conclusiones y se apuntan algunas líneas futuras de investigación basadas en mejoras sobre la aplicación y transferibilidad de los resultados. The study of service quality and its implication for transport contracts has several approaches in research and practical applications, such as the development of the SERVQUAL method, the UE QUATTRO and EQUIP research projects, the Transit Capacity and Quality of Service Manual and finally the EN 13816 standard. In all cases the main stream is the consideration of quality from the user’s point of view, thus obtaining a Customer Satisfaction Index as a measurement of the overall service quality. This approach ignores quality consequences for transport providers, authorities and operators, particularly economic implications. The main target of this thesis is to estimate the real economic impact of improving quality attributes for a bus operator. Chapter 2 includes a thorough analysis of the state of the art of general methodologies on service quality, their applications for public transport, and particularly for quality costing. In chapters 3 and 4, the Activity Based Costing (ABC) methodology is proposed for a suburban bus contract in Madrid, Tres Cantos. Perceived and expected quality surveys are used together with economic and performance information, as well as interviews with key staff from the operator. The whole set of surveys, interviews and ABC methodology puts together a comprehensive approach for analysis and research. Surveys and subsequent analysis shows service headway, punctuality and safety as the three most important service attributes from the user’s point of view. The proposed methodology has been applied to these three variables, as described in chapter 5. Results obtained in chapter 6 show the consistency and practicality of this methodology, overcoming simplifications from traditional accounting procedures. According to the latter, a calculation of costs based on mileage can overvalue quality improvements up to three times the results following ABC methodology. Finally, in chapter 7, the main conclusions are highlighted and some future research is suggested in terms of application improvements as well as results transferability.
Resumo:
The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market
Resumo:
The potential shown by Lean in different domains has aroused interest in the software industry. However, it remains unclear how Lean can be effectively applied in a domain such as software development that is fundamentally different from manufacturing. This study explores how Lean principles are implemented in software development companies and the challenges that arise when applying Lean Software Development. For that, a case study was conducted at Ericsson R&D Finland, which successfully adopted Scrum in 2009 and subsequently started a comprehensible transition to Lean in 2010. Focus groups were conducted with company representatives to help devise a questionnaire supporting the creation of a Lean mindset in the company (Team Amplifier). Afterwards, the questionnaire was used in 16 teams based in Finland, Hungary and China to evaluate the status of the transformation. By using Lean thinking, Ericsson R&D Finland has made important improvements to the quality of its products, customer satisfaction and transparency within the organization. Moreover, build times have been reduced over ten times and the number of commits per day has increased roughly five times.The study makes two main contributions to research. First, the main factors that have enabled Ericsson R&D?s achievements are analysed. Elements such as ?network of product owners?, ?continuous integration?, ?work in progress limits? and ?communities of practice? have been identified as being of fundamental importance. Second, three categories of challenges in using Lean Software Development were identified: ?achieving flow?, ?transparency? and ?creating a learning culture?
Resumo:
El proceso de cambio de una sociedad industrial a una sociedad del conocimiento, que experimenta el mundo globalizado en el siglo XXI, induce a las empresas y organizaciones a desarrollar ventajas competitivas y sostenibles basadas en sus activos intangibles, entre los cuales destacan los sistemas de gestión en general y los sistemas de gestión de la calidad (SGC) en particular. Las organizaciones dedicadas a la producción de petróleo están influenciadas por dicha tendencia. El petróleo es un recurso natural con reservas limitadas, cuya producción y consumo ha crecido progresivamente, aportando la mayor cuota (35 %) del total de la energía que se consume en el mundo contemporáneo, aporte que se mantendrá hasta el año 2035, según las previsiones más conservadoras. Por tanto, se hace necesario desarrollar modelos de producción innovadores, que contribuyan a la mejora del factor de recobro de los yacimientos y de la vida útil de los mismos, al tiempo que satisfagan los requerimientos de producción y consumo diarios de los exigentes mercados globales. El objeto de esta investigación es el desarrollo de un modelo de gestión de la calidad y su efecto en el desempeño organizacional, a través del efecto mediador de los constructos satisfacción del cliente interno y gestión del conocimiento en la producción de petróleo. Esta investigación de carácter explicativo, no experimental, transeccional y ex-postfacto, se realizó en la región petrolífera del lago de Maracaibo, al occidente de Venezuela, la cual tiene más de 70 años en producción y cuenta con yacimientos maduros. La población objeto de estudio fue de 369 trabajadores petroleros, quienes participaron en las mesas técnicas de la calidad, durante los meses de mayo y julio del año 2012, los cuales en su mayoría están en proceso de formación como analistas, asesores y auditores de los SGC. La técnica de muestreo aplicada fue de tipo aleatorio simple, con una muestra de 252 individuos. A la misma se le aplicó un cuestionario diseñado ad hoc, el cual fue validado por las técnicas de juicio de expertos y prueba piloto. El procedimiento de investigación se realizó a través de una secuencia, que incluyó la elaboración de un modelo teórico, basado en la revisión del estado del arte; un modelo factorial, sobre la base del análisis factorial de los datos de la encuesta; un modelo de regresión lineal, elaborado a través del método de regresión lineal simple y múltiple; un modelo de análisis de sendero, realizado con el software Amos 20 SPSS y finalmente, un modelo informático, realizado con el simulador Vensim PLE v.6.2. Los resultados obtenidos indican que el modelo teórico se transformó en un modelo empírico, en el cual, la variable independiente fue el SGC, la variable mediadora fue la integración de las dimensiones eliminación de la no conformidad, satisfacción del cliente interno y aprendizaje organizacional (ENCSCIAO) y la variable respuesta la integración de las dimensiones desempeño organizacional y aprendizaje organizacional (DOOA). Se verificó el efecto mediador del ENSCIAO sobre la relación SGC-DOOA con una bondad del ajuste, del 42,65%. En el modelo de regresión múltiple se encontró que las variables determinantes son eliminación de la no conformidad (ENC), conocimiento adquirido (CA) y conocimiento espontáneo (CE), lo cual fue corroborado con el modelo de análisis de sendero. El modelo informático se desarrolló empleando datos aproximados de una unidad de producción tipo, generándose cuatro escenarios; siendo el más favorable, aquel en el cual se aplicaba el SGC y variables relacionadas, reduciendo la desviación de la producción, incrementando el factor de recobro y ampliando la vida útil del yacimiento. Se concluye que la aplicación del SGC y constructos relacionados favorece el desempeño y la producción de las unidades de explotación de yacimientos petrolíferos maduros. Los principales aportes de la tesis son la obtención de un modelo de gestión de la producción de petróleo en yacimientos maduros, basado en los SGC. Asimismo, el desarrollo de un concepto de gestión de la calidad asociado a la reducción de la desviación de la producción petrolífera anual, al incremento del factor de recobro y al aumento de la vida útil del yacimiento. Las futuras líneas de investigación están orientadas a la aplicación del modelo en contextos reales y específicos, para medir su impacto y realizar los ajustes pertinentes. ABSTRACT The process of change from an industrial society to a knowledge-based society, which undergoes the globalized world in the twenty-first century, induces companies and organizations to develop a sustainable and competitive advantages based on its intangible assets, among which are noteworthy the management systems in general and particularly the quality management systems (QMS). Organizations engaged in oil production are influenced by said trend. Oil is a natural resource with limited reserves, where production and consumption has grown progressively, providing the largest share (35%) of the total energy consumed in the contemporary world, a contribution that will remain until the year 2035 according to the more conservative trust estimations. Therefore, it becomes necessary to develop innovative production models which contribute with the improvement of reservoirs´ recovery factor and the lifetime thereof, while meeting the production requirements and daily consumption of demanding global markets. The aim of this research is to develop a model of quality management and its effect on organizational performance through the mediator effect of the constructs, internal customer satisfaction and knowledge management in oil production. This research of explanatory nature, not experimental, transactional and expos-facto was carried out in the oil-region of Maracaibo Lake located to the west of Venezuela, which has more than 70 years in continuous production and has mature reservoirs. The population under study was 369 oil workers who participated in the technical quality workshops, during the months of May and July of 2012, the majority of which were in the process of training as analysts, consultants and auditors of the QMS. The sampling technique applied was simple random type. To a sample of 252 individuals of the population it was applied an ad hoc designed questionnaire, which was validated by the techniques of expert judgment and pilot test. The research procedure was performed through a sequence, which included the elaboration of a theoretical model, based on the review of the state of the art; a factorial model with based on factorial analysis of the survey data; a linear regression model, developed through the method of simple and multiple linear regression; a structural equation model, made with software °Amos 20 SPSS° and finally, a computer model, performed with the simulator Vensim PLE v.6.2. The results indicate that the theoretical model was transformed into an empirical model, in which the independent variable was the QMS, the mediator variable was the integration of the dimensions: elimination of non-conformity, internal customer satisfaction and organizational learning (ENCSCIAO) and the response variable the integration of the dimensions, organizational performance and learning organizational (DOOA). ENSCIAO´s mediator effect on the relation QMS-DOOA was verified with a goodness of fit of 42,65%. In the multiple regression model was found to be the determining variables are elimination of nonconformity (ENC), knowledge acquired (CA) and spontaneous knowledge (EC), which was verified with the structural equation model. The computer model was developed based on approximate data of an oil production unit type, creating four (04) scenarios; being the most favorable, that one which it was applied the QMS and related variables, reducing the production deviation, increasing the recovery factor and extending the lifetime of the reservoir. It is concluded that QMS implementation powered with the related constructs, favors performance and production of mature oilfield of exploitation reservoirs units. The main contributions of this thesis are obtaining a management model for oil production in mature oilfields, based on QMS. In addition, development of a concept of quality associated to reduce the annual oil production deviation, increase the recovery factor and increase oilfield lifetime. Future lines of research are oriented to the implementation of this model in real and specific contexts to measure its impact and make the necessary adjustments that might take place.
Resumo:
En el siguiente trabajo se documentará un plan de negocio para Miraparty. Miraparty es una empresa que ofrece un servicio de photocall innovador en tres diferentes ámbitos de negocio: Bodas, celebración de todo tipo de eventos socio-culturales (fiestas, eventos deportivos, musicales, gastronómicos,...), y en el ámbito empresarial para eventos promocionales. Se realizará primero una presentación de la compañía describiendo sus servicios y su organización. Posteriormente se describirá tanto las características técnicas de toda la tecnología empleada, así como una descripción detallada del proceso y modelo de operaciones de Miraparty. A continuación se ha realizado un estudio de mercado analizando los competidores dentro del mismo sector, cuyas conclusiones se muestran en una tabla resumen, y termina con una matriz DAFO que ayuda a ver y comprender la situación actual de Miraparty. Dentro de la sección específica de marketing, se ha descrito primero el posicionamiento de la empresa para, posteriormente, desarrollar las capacidades de Go-to-market dentro de los distintos canales comerciales que Miraparty debe emplear. Además de ello, se ha diseñado una encuesta de satisfacción al cliente para su uso posterior. Por último, se ha desarrollado un caso de negocio en el que se estudia con éxito la viabilidad de la apertura de una franquicia de Miraparty en la ciudad de Madrid. Se ha optado por realizar un estudio con un horizonte de tres años. ---ABSTRACT---In following document a business plan for Miraparty will be developed. Miraparty is a company that offers a brand new photocall service in three different business areas: Weddings, every kind of social and cultural events (parties, sport events, musical events,...) and for promotional events for other companies. First of all, Miraparty will be described as well as its offered services and its organization. Afterwards, used technology and technical equipment will be described along with a detailed description of its core process and Miraparty's operational model. Secondly, it is presented a market analysis with a thorough analysis of Miraparty's direct competitors. Conclusions are summarized in a comparison table, and this part finishes with a DAFO matrix that helps understanding Miraparty's current situation. Next, in marketing related section, firstly, company's services positioning has been described using BCG matrix to, secondly, develop Go-to-Market capabilities for every market channel Miraparty should use. Besides that, a customer satisfaction survey form has been designed for its further use. Finally, a business case has been developed to study v Madrid. In this study it has been decided to state a three year time limit.