Dry cooling with night cool storage to enhance solar power plants performance in extreme conditions areas

Solar thermal power plants are usually installed in locations with high yearly average solar radiation, often deserts. In such conditions, cooling water required for thermodynamic cycles is rarely available. Moreover, when solar radiation is high, ambient temperature is very high as well; this leads to excessive condensation temperature, especially when air-condensers are used, and decreases the plant efficiency. However, temperature variation in deserts is often very high, which drives to relatively low temperatures during the night. This fact can be exploited with the use of a closed cooling system, so that the coolant (water) is chilled during the night and store. Chilled water is then used during peak temperature hours to cool the condenser (dry cooling), thus enhancing power output and efficiency. The present work analyzes the performance improvement achieved by night thermal cool storage, compared to its equivalent air cooled power plant. Dry cooling is proved to be energy-effective for moderately high day–night temperature differences (20 °C), often found in desert locations. The storage volume requirement for different power plant efficiencies has also been studied, resulting on an asymptotic tendency.

Night time performance of a storage integrated solar thermophotovoltaic (SISTPV) system

Energy storage at low maintenance cost is one of the key challenges for generating electricity from the solar energy. This paper presents the theoretical analysis (verified by CFD) of the night time performance of a recently proposed conceptual system that integrates thermal storage (via phase change materials) and thermophotovoltaics for power generation. These storage integrated solar thermophotovoltaic (SISTPV) systems are attractive owing to their simple design (no moving parts) and modularity compared to conventional Concentrated Solar Power (CSP) technologies. Importantly, the ability of high temperature operation of these systems allows the use of silicon (melting point of 1680 K) as the phase change material (PCM). Silicon's very high latent heat of fusion of 1800 kJ/kg and low cost ($1.70/kg), makes it an ideal heat storage medium enabling for an extremely high storage energy density and low weight modular systems. In this paper, the night time operation of the SISTPV system optimised for steady state is analysed. The results indicate that for any given PCM length, a combination of small taper ratio and large inlet hole-to-absorber area ratio are essential to increase the operation time and the average power produced during the night time. Additionally, the overall results show that there is a trade-off between running time and the average power produced during the night time. Average night time power densities as high as 30 W/cm(2) are possible if the system is designed with a small PCM length (10 cm) to operate just a few hours after sun-set, but running times longer than 72 h (3 days) are possible for larger lengths (50 cm) at the expense of a lower average power density of about 14 W/cm(2). In both cases the steady state system efficiency has been predicted to be about 30%. This makes SISTPV systems to be a versatile solution that can be adapted for operation in a broad range of locations with different climate conditions, even being used off-grid and in space applications.

Experimentación radical italiana en torno al night-club. Warhol-MacLuhan-Price y la arquitectura eléctrica de los años 60.

La segunda mitad de los años 60, ese convulso periodo generador de experiencias largamente revisitadas, es testigo también de un curioso fenómeno en Italia que, vinculado al auge de los locales nocturnos en Estados Unidos y a un intenso clima de emancipación social, utiliza estos nuevos “palacios de la diversión” como fuente de inspiración ideológica al ser percibidos entre los jóvenes arquitectos y diseñadores radicales italianos como un laboratorio experimental estilístico y funcional capaz de generar modelos para un nuevo orden social ligado al entretenimiento. La intensidad productiva de estos años da como resultado multitud de propuestas donde la arqui­tectura actúa como catalizadora de una pulsión social que mezcla en el mismo espa­cio la vanguardia cultural y experimental más radical con el fenómeno de masas de la sociedad del espectáculo, permitiendo a la industria del placer ocupar sin complejos una posición clave en el discurso de una nueva generación que traslada intenciona­damente su interés desde la forma construida a la producción de ambientes artificia­les, electrónicamente amplificados, demostrando al mismo tiempo su compromiso con las formas y la lógica de las nuevas tecnologías.