Propuesta metodológica para la identificación de medidas de adaptación al cambio climático en sistemas de recursos hídricos

Esta tesis realiza una contribución metodológica en el estudio de medidas de adaptación potencialmente adecuadas a largo plazo, donde los sistemas de recursos hídricos experimentan fuertes presiones debido a los efectos del cambio climático. Esta metodología integra el análisis físico del sistema, basándose en el uso de indicadores que valoran el comportamiento de éste, y el análisis económico mediante el uso del valor del agua. El procedimiento metodológico inicia con la construcción de un conjunto de escenarios futuros, que capturan por un lado las características de variabilidad de las aportaciones de diversos modelos climáticos y, por otro, las características hidrológicas de la zona de estudio. Las zonas de estudio seleccionadas fueron las cuencas del Guadalquivir, Duero y Ebro y se utilizaron como datos observados las series de escorrentía en régimen natural estimadas por el modelo SIMPA que está calibrado en la totalidad del territorio español. Estas series observadas corresponden al periodo 1961-1990. Los escenarios futuros construidos representan el periodo 2071-2100. La identificación de medidas de adaptación se apoyó en el uso de indicadores que sean capaces de caracterizar el comportamiento de un sistema de recursos hídricos frente a los efectos del cambio climático. Para ello se seleccionaron los indicadores de calidad de servicio (I1) y de confiabilidad de la demanda (I2) propuestos por Martin-Carrasco et al. (2012). Estos indicadores valoran el comportamiento de un sistema mediante la identificación de los problemas de escasez de agua que presente, y requieren para su cuantificación el uso de un modelo de optimización. Para este estudio se ha trabajado con el modelo de optimización OPTIGES. La determinación de estos indicadores fue realizada para análisis a corto plazo donde los efectos del cambio climático no son de relevancia, por lo que fue necesario analizar su capacidad para ser usados en sistemas afectados por dichos efectos. Para este análisis se seleccionaron tres cuencas españolas: Guadalquivir, Duero y Ebro, determinándose que I2 no es adecuado para este tipo de escenarios. Por ello se propuso un nuevo indicador “Indicador de calidad de servicio bajo cambio climático” (I2p) que mantiene los mismos criterios de valoración que I2 pero que responde mejor bajo fuertes reducciones de aportaciones producto del cambio climático. La metodología propuesta para la identificación de medidas de adaptación se basa en un proceso iterativo en el cual se van afectando diversos elementos que conforman el esquema del sistema bajo acciones de gestión previamente identificadas, hasta llegar a un comportamiento óptimo dado por el gestor. Las mejoras de estas afectaciones son cuantificadas mediante los indicadores I1 e I2p, y de este conjunto de valores se selecciona la que se acerca más al comportamiento óptimo. Debido a la extensa cantidad de información manejada en este análisis, se desarrolló una herramienta de cálculo automatizada en Matlab. El proceso seguido por esta herramienta es: (i) Ejecución del modelo OPTIGES para las diferentes modificaciones por acciones de gestión; (ii) Cálculo de los valores de I1 e I2p para cada una de estas afectaciones; y (iii) Selección de la mejor opción. Este proceso se repite hasta llegar al comportamiento óptimo buscado, permitiendo la identificación de las medidas de adaptación mas adecuadas. La aplicación de la metodología para la identificación de medidas de adaptación se realizó en la cuenca del Guadalquivir, por ser de las tres cuencas analizadas bajo los indicadores I1 e I2p la que presenta los problemas más serios de escasez de agua. Para la identificación de medidas de adaptación se analizaron dos acciones de gestión: 1) incremento de los volúmenes de regulación y 2) reducción de las demandas de riego, primero bajo la valoración del comportamiento físico del sistema (análisis de sensibilidad) permitiendo identificar que la primera acción de gestión no genera cambios importantes en el comportamiento del sistema, que si se presentan bajo la segunda acción. Posteriormente, con la acción que genera cambios importantes en el comportamiento del sistema (segunda acción) se identificaron las medidas de adaptación más adecuadas, mediante el análisis físico y económico del sistema. Se concluyó que en la cuenca del Guadalquivir, la acción de reducción de las demandas de riego permite minimizar e incluso eliminar los problemas de escasez de agua que se presentarían a futuro bajo diferentes proyecciones hidrológicas, aunque estas mejoras implicarían fuertes reducciones en dichas demandas. Siendo las demandas más afectadas aquellas ubicadas en cabecera de cuenca. Los criterios para la reducción de las demandas se encuentran en función de las productividades y garantías con las que son atendidas dichas demandas. This thesis makes a methodological contribution to the study of potentially suitable adaptation measures in the long term, where water resource systems undergo strong pressure due to the effects of climate change. This methodology integrates the physical analysis of the system, by the use of indicators which assess its behavior, and the economic analysis by the use of the value of water. The methodological procedure begins with the building of a set of future scenarios that capture, by one hand, the characteristics and variability of the streamflow of various climate models and, on the other hand, the hydrological characteristics of the study area. The study areas chosen were the Guadalquivir, Ebro and Duero basins, and as observed data where used runoff series in natural regimen estimated by the SIMPA model, which is calibrated in the whole Spanish territory. The observed series are for the 1961-1990 period. The future scenarios built represent the 2071-2100 periods. The identification of adaptation measures relied on the use of indicators that were able of characterize the behavior of one water resource system facing the effects of climate change. Because of that, the Demand Satisfaction Index (I1) and the Demand Reliability Index (I2) proposed by Martin-Carrasco et al. (2012) were selected. These indicators assess the behavior of a system by identifying the water scarcity problems that it presents, and require in order to be quantified the use of one optimization model. For this study the OPTIGES optimization model has been used. The determination of the indicators was made for the short-term analysis where the climates change effect are not relevant, so it was necessary to analyze their capability to be used in systems affected by those these. For this analysis three Spanish basins were selected: Guadalquivir, Duero and Ebro. It was determined that the indicator I2 is not suitable for this type of scenario. It was proposed a new indicator called “Demand Reliability Index under climate change” (I2p), which keeps the same assessment criteria than I2, but responsive under heavy reductions of streamflow due to climate change. The proposed methodology for identifying adaptation measures is based on an iterative process, in which the different elements of the system´s schema are affected by previously defined management actions, until reach an optimal behavior given by the manager. The improvements of affectations are measured by indicators I1 e I2p, and from this set of values it is selected the affectation that is closer to the optimal behavior. Due to the large amount of information managed in this analysis, it was developed an automatic calculation tool in Matlab. The process followed by this tool is: Firstly, it executes the OPTIGES model for the different modifications by management actions; secondly, it calculates the values of I1 e I2p for each of these affectations; and finally it chooses the best option. This process is performed for the different iterations that are required until reach the optimal behavior, allowing to identify the most appropriate adaptation measured. The application of the methodology for the identification of adaptation measures was conducted in the Guadalquivir basin, due to this was from the three basins analyzed under the indicators I1 e I2p, which presents the most serious problems of water scarcity. For the identification of adaptation measures there were analyzed two management actions: 1) To increase the regulation volumes, and 2) to reduce the irrigation demands, first under the assessment of the physical behavior of the system (sensibility analysis), allowing to identify that the first management action does not generate significant changes in the system´s behavior, which there are present under the second management action. Afterwards, with the management action that generates significant changes in the system´s behavior (second management action), there were identified the most adequate adaptation measures, through the physical and economic analysis of the system. It was concluded that in the Guadalquivir basin, the action of reduction of irrigation demands allows to minimize or even eliminate the water scarcity problems that could exist in the future under different hydrologic projections, although this improvements should involve strong reductions of the irrigation demands. Being the most affected demands those located in basins head. The criteria for reducing the demands are based on the productivities and reliabilities with which such demands are meet.

Effects of water potential on spore germination and viability of Fusarium species

Germination of macroconidia and/or microconidia of 24 strains of Fusarium solani, F. chlamydosporum, F. culmorum, F. equiseti, F. verticillioides, F. sambucinum, F. oxysporum and F. proliferatum isolated from fluvial channels and sea beds of the south-eastern coast of Spain, and three control strains (F. oxysporum isolated from affected cultures) was studied in distilled water in response to a range of water potentials adjusted with NaCI. (0, -13.79, -41.79, -70.37, -99.56 and -144.54 bars). The vialibility (UFC/ml) of suspension was also tested in three time periods (0,24 and 48h). Conidia always germinated in distilled water. The pattern of conidial germination obseved of F. verticillioides, F. oxysporum, F. proliferatum, F. chlamydosporum and F. culmorum was similar. A great diminution of spore germination was found in -13.79 bars solutions. Spore germination percentage for F. solani isolates was maximal at 48 h. and -13.79 bars with 21.33% spore germination, 16% higher than germination in distilled water. F. equiseti shows the maximum germination percentage in -144.54 bars solution in 24 h time with 12.36% germination. These results did not agree with those obtained in the viability test where maximum germination was found in distilled water. The viability analysis showed the great capacity of F. verticilloides strains to form viable colonies, even in such extreme conditions as -144,54 bars after 24 h F. proliferatum colony formation was prevented in the range of -70.37 bars. These results show the clear affectation of water potential to conidia germination of Fusaria. The ability of certain species of Fusarium to develop a saprophytic life in the salt water of the Mediterraneam Sea could be certain. Successful germination, even under high salty media conditions, suggests taht Fusarium spp. could have a competitive advantage over other soil fungi in crops irrigated with saline water. In the specific case of F. solani, water potential of -13.79 bars affected germination positively. It could indicate that F. solani has an special physiological mechanism of survival in low water potential environments.

Artificial metaplasticity prediction model for cognitive rehabilitation outcome in acquired brain injury patients

Objective The main purpose of this research is the novel use of artificial metaplasticity on multilayer perceptron (AMMLP) as a data mining tool for prediction the outcome of patients with acquired brain injury (ABI) after cognitive rehabilitation. The final goal aims at increasing knowledge in the field of rehabilitation theory based on cognitive affectation. Methods and materials The data set used in this study contains records belonging to 123 ABI patients with moderate to severe cognitive affectation (according to Glasgow Coma Scale) that underwent rehabilitation at Institut Guttmann Neurorehabilitation Hospital (IG) using the tele-rehabilitation platform PREVIRNEC©. The variables included in the analysis comprise the neuropsychological initial evaluation of the patient (cognitive affectation profile), the results of the rehabilitation tasks performed by the patient in PREVIRNEC© and the outcome of the patient after a 3–5 months treatment. To achieve the treatment outcome prediction, we apply and compare three different data mining techniques: the AMMLP model, a backpropagation neural network (BPNN) and a C4.5 decision tree. Results The prediction performance of the models was measured by ten-fold cross validation and several architectures were tested. The results obtained by the AMMLP model are clearly superior, with an average predictive performance of 91.56%. BPNN and C4.5 models have a prediction average accuracy of 80.18% and 89.91% respectively. The best single AMMLP model provided a specificity of 92.38%, a sensitivity of 91.76% and a prediction accuracy of 92.07%. Conclusions The proposed prediction model presented in this study allows to increase the knowledge about the contributing factors of an ABI patient recovery and to estimate treatment efficacy in individual patients. The ability to predict treatment outcomes may provide new insights toward improving effectiveness and creating personalized therapeutic interventions based on clinical evidence.

Clustering techniques for patients suffering acquired brain injury inneuro personal trainer

The study of the effectiveness of the cognitive rehabilitation processes and the identification of cognitive profiles, in order to define comparable populations, is a controversial area, but concurrently it is strongly needed in order to improve therapies. There is limited evidence about cognitive rehabilitation efficacy. Many of the trials conclude that in spite of an apparent clinical good response, differences do not show statistical significance. The common feature in all these trials is heterogeneity among populations. In this situation, observational studies on very well controlled cohort of studies, together with innovative methods in knowledge extraction, could provide methodological insights for the design of more accurate comparative trials. Some correlation studies between neuropsychological tests and patients capacities have been carried out -1---2- and also correlation between tests and morphological changes in the brain -3-. The procedures efficacy depends on three main factors: the affectation profile, the scheduled tasks and the execution results. The relationship between them makes up the cognitive rehabilitation as a discipline, but its structure is not properly defined. In this work we present a clustering method used in Neuro Personal Trainer (NPT) to group patients into cognitive profiles using data mining techniques. The system uses these clusters to personalize treatments, using the patients assigned cluster to select which tasks are more suitable for its concrete needs, by comparing the results obtained in the past by patients with the same profile.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.