Determinación del Modelo de Meta-Análisis Para Experimentación en Ingeniería del Software

Este proyecto de investigación se desarrolla en el marco de la cooperación existente entre el Grupo de Ingeniería de Software Experimental (GrISE) de la Facultad de Informática de la Universidad Politécnica de Madrid, el Grupo de Investigación en Sistemas de Información (GISI) del Departamento de Desarrollo Productivo y Tecnológico de la Universidad Nacional de Lanús y el Grupo de Estudio en Metodologías de Ingeniería de Software (GEMIS) de la Facultad Regional Buenos Aires de la Universidad Tecnológica Nacional.

Estudio experimental de la efectividad de la entrevista abierta frente a la entrevista independiente de contexto

OBJETIVO: Estudiar la efectividad relativa de las técnicas de entrevista abierta y entrevista independiente de contexto en la identificación de requisitos para sistemas software. MÉTODO: Experimento controlado ensayando dos factores: "tipo de entrevista" (abierta e independiente de contexto) y "tipo de problema" (identificación de requisitos para dos sistemas software distintos). Debido al reducido número de sujetos experimentales, se ha utilizado un diseño de medidas repetidas dentro de los sujetos. RESULTADOS: El poder estadístico del estudio es en general insuficiente, pero hemos podido constatar que el tipo de problema posee efectos significativos en la efectividad del proceso de relevamiento de requisitos. La experiencia del analista juega también un papel importante. El tipo de entrevista utilizada afecta en mucha menor medida. CONCLUSIONES: Es necesario comprender mejor qué es un problema de relevamiento de requisitos. Esto nos permitirá diseñar estrategias más eficaces para una identificación certera de los requisitos del software.

An energy-efficient strategy for combined RSS-PDR indoor localization

We propose an optimization-based framework to minimize the energy consumption in a sensor network when using an indoor localization system based on the combination of received signal strength (RSS) and pedestrian dead reckoning (PDR). The objective is to find the RSS localization frequency and the number of RSS measurements used at each localization round that jointly minimize the total consumed energy, while ensuring at the same time a desired accuracy in the localization result. The optimization approach leverages practical models to predict the localization error and the overall energy consumption for combined RSS-PDR localization systems. The performance of the proposed strategy is assessed through simulation, showing energy savings with respect to other approaches while guaranteeing a target accuracy.

Comparative analysis of meta-analysis methods: when to use which?

Background: Several meta-analysis methods can be used to quantitatively combine the results of a group of experiments, including the weighted mean difference, statistical vote counting, the parametric response ratio and the non-parametric response ratio. The software engineering community has focused on the weighted mean difference method. However, other meta-analysis methods have distinct strengths, such as being able to be used when variances are not reported. There are as yet no guidelines to indicate which method is best for use in each case. Aim: Compile a set of rules that SE researchers can use to ascertain which aggregation method is best for use in the synthesis phase of a systematic review. Method: Monte Carlo simulation varying the number of experiments in the meta analyses, the number of subjects that they include, their variance and effect size. We empirically calculated the reliability and statistical power in each case Results: WMD is generally reliable if the variance is low, whereas its power depends on the effect size and number of subjects per meta-analysis; the reliability of RR is generally unaffected by changes in variance, but it does require more subjects than WMD to be powerful; NPRR is the most reliable method, but it is not very powerful; SVC behaves well when the effect size is moderate, but is less reliable with other effect sizes. Detailed tables of results are annexed. Conclusions: Before undertaking statistical aggregation in software engineering, it is worthwhile checking whether there is any appreciable difference in the reliability and power of the methods. If there is, software engineers should select the method that optimizes both parameters.

Exploring the logic of mobile search

After more than a decade of development work and hopes, the usage of mobile Internet has finally taken off. Now, we are witnessing the first signs of evidence of what might become the explosion of mobile content and applications that will be shaping the (mobile) Internet of the future. Similar to the wired Internet, search will become very relevant for the usage of mobile Internet. Current research on mobile search has applied a limited set of methodologies and has also generated a narrow outcome of meaningful results. This article covers new ground, exploring the use and visions of mobile search with a users' interview-based qualitative study. Its main conclusion builds upon the hypothesis that mobile search is sensitive to a mobile logic different than today's one. First, (advanced) users ask for accessing with their mobile devices the entire Internet, rather than subsections of it. Second, success is based on new added-value applications that exploit unique mobile functionalities. The authors interpret that such mobile logic involves fundamentally the use of personalised and context-based services.

Reflectance anisotropy spectroscopy assessment of the MOVPE nucleation of GaInP on Germanium (100)

This work summarizes the observations made on the variation and time evolution of the reflectanceanisotropy signal during the MOVPE growth of GaInPnucleation layers on Germanium substrates. This in situ monitoring tool is used to assess the impact of different nucleation routines and reactor conditions on the quality of the layers grown. This comparison is carried out by establishing a correlation between reflectanceanisotropy signature at 2.1 eV and the morphology of the epilayers evaluated by atomic force microscopy (AFM). This paper outlines the potential of reflectanceanisotropy to predict, explore, and therefore optimize, the best growth conditions that lead to a high quality III–V epilayer on a Ge substrate

Work in progress - Exploiting videoconferencing possibilities to promote the European convergence process

This paper introduces the experience of using videoconferencing and recording as a mechanism to support courses which need to be promoted or discontinued within the framework of the European convergence process. Our objective is to make these courses accessible as live streaming during the lessons as well as recorded lectures and associated documents available to the students as soon as the lesson has finished. The technology used has been developed in our university and it is all open source. Although this is a technical project the key is the human factor involved. The people managing the virtual sessions are students of the courses being recorded. However, they lack technical knowledge, so we had to train them in audiovisuals and enhance the usability of the videoconferencing tool and platform. The validation process is being carried out in five real scenarios at our university. During the whole period we are evaluating technical and pedagogical issues of this experience for both students and teachers to guide the future development of the service. Depending on the final results, the service of lectures recording will be available as educational resource for all of the teaching staff of our university.

Knowledge Management and Information Systems based on Workflow Technology

Knowledge management is critical for the success of virtual communities, especially in the case of distributed working groups. A representative example of this scenario is the distributed software development, where it is necessary an optimal coordination to avoid common problems such as duplicated work. In this paper the feasibility of using the workflow technology as a knowledge management system is discussed, and a practical use case is presented. This use case is an information system that has been deployed within a banking environment. It combines common workflow technology with a new conception of the interaction among participants through the extension of existing definition languages.

Integral solution for Web conferencing event management

Nowadays video and web conferencing systems have become effective tools for communication and collaboration inside organizations. However, although these systems have evolved and now provide very nice features (e.g. sharing multimedia and documents), they are still too focused on the moment the meeting takes place. The existing systems provide very few facilities to organize the meeting and they do not take advantage of the possibilities the generated content offers once the meeting is finished. In this paper, we analyze the life cycle of a web conference and how existing systems monitor these conferences. Finally we present our solution, based on our know-how in videoconference management and our experience with these existing systems.

Dynamic chanel model LMS updating for RSS-based localization

Received signal strength-based localization systems usually rely on a calibration process that aims at characterizing the propagation channel. However, due to the changing environmental dynamics, the behavior of the channel may change after some time, thus, recalibration processes are necessary to maintain the positioning accuracy. This paper proposes a dynamic calibration method to initially calibrate and subsequently update the parameters of the propagation channel model using a Least Mean Squares approach. The method assumes that each anchor node in the localization infrastructure is characterized by its own propagation channel model. In practice, a set of sniffers is used to collect RSS samples, which will be used to automatically calibrate each channel model by iteratively minimizing the positioning error. The proposed method is validated through numerical simulation, showing that the positioning error of the mobile nodes is effectively reduced. Furthermore, the method has a very low computational cost; therefore it can be used in real-time operation for wireless resource-constrained nodes.

Enhancing Activity Recognition by Fusing Inertial and Biometric Information

Activity recognition is an active research field nowadays, as it enables the development of highly adaptive applications, e.g. in the field of personal health. In this paper, a light high-level fusion algorithm to detect the activity that an individual is performing is presented. The algorithm relies on data gathered from accelerometers placed on different parts of the body, and on biometric sensors. Inertial sensors allow detecting activity by analyzing signal features such as amplitude or peaks. In addition, there is a relationship between the activity intensity and biometric response, which can be considered together with acceleration data to improve the accuracy of activity detection. The proposed algorithm is designed to work with minimum computational cost, being ready to run in a mobile device as part of a context-aware application. In order to enable different user scenarios, the algorithm offers best-effort activity estimation: its quality of estimation depends on the position and number of the available inertial sensors, and also on the presence of biometric information.

Experimentel ADS-B based surveillance

This paper describes an ADS-B implementation in air-to-air and ground based experimental surveillance within a prototype ATM system. The relations between airborne and ground systems related to surveillance are detailed, and the prototype surveillance systems and their algorithms described. Their performance is analysed, based both on simulated and real data.

The Role of Patents in the Advent of Web 2.0

Given the significant impact of Web 2.0-related innovations on new Internet-based initiatives, this paper seeks to identify to what extent the main developments are protected by patents and whether patents have had a leading role in the advent of Web 2.0. The article shows that the number of patent applications filed is not that important for many of the Web 2.0 technologies in frequent use and that, of those filed, those granted are even less. The conclusion is that patents do not seem to be a relevant factor in the development of the Web 2.0 (and more generally in dynamic markets) where there is a high degree of innovation and low entry barriers for newcomers.

Public support for the deployment of next generation access networks-Common themes, methodological caveats and further research

Next generation telecommunications infrastructures are considered as a principal example of a new technology for sustainable economic growth. From their deployment it is expected that a wealth of innovations – hopefully converted into economic growth – new sources of employment and improved quality of life will result. In line with these prospects, public administrations at supranational, national, regional and local levels have encouraged the development of these new infrastructures. Moreover, in times of economic crisis, public assistance to deploy such networks encompasses the promise of placing a weak economy on the road to prosperity. However, such arguments and political claims clearly require rigorous assessment. In particular, any such assessment must adequately address the appropriate form of modelling that best captures key elements for identifiable progress from next generation access networks (NGAN).

Performance of Scheduling Policies in Adversarial Networks with Non-synchronized Clocks

In this paper we generalize the Continuous Adversarial Queuing Theory (CAQT) model (Blesa et al. in MFCS, Lecture Notes in Computer Science, vol. 3618, pp. 144–155, 2005) by considering the possibility that the router clocks in the network are not synchronized. We name the new model Non Synchronized CAQT (NSCAQT). Clearly, this new extension to the model only affects those scheduling policies that use some form of timing. In a first approach we consider the case in which although not synchronized, all clocks run at the same speed, maintaining constant differences. In this case we show that all universally stable policies in CAQT that use the injection time and the remaining path to schedule packets remain universally stable. These policies include, for instance, Shortest in System (SIS) and Longest in System (LIS). Then, we study the case in which clock differences can vary over time, but the maximum difference is bounded. In this model we show the universal stability of two families of policies related to SIS and LIS respectively (the priority of a packet in these policies depends on the arrival time and a function of the path traversed). The bounds we obtain in this case depend on the maximum difference between clocks. This is a necessary requirement, since we also show that LIS is not universally stable in systems without bounded clock difference. We then present a new policy that we call Longest in Queues (LIQ), which gives priority to the packet that has been waiting the longest in edge queues. This policy is universally stable and, if clocks maintain constant differences, the bounds we prove do not depend on them. To finish, we provide with simulation results that compare the behavior of some of these policies in a network with stochastic injection of packets.