Studio del processo CVI/CVD per lo sviluppo di compositi ceramici rinforzati a fibra lunga


Autoria(s): Burgio, Federica
Contribuinte(s)

Albonetti, Stefania

Data(s)

29/03/2011

Resumo

The most relevant thermo-mechanical properties of SiC or C based CFCCs are high strength, high toughness, low weight, high reliability, thermal shock and fatigue resistance. Thanks to these special characteristics, the CFCCs are the best candidates to substitute metals and monolithic ceramics, traditionally employed to realize components in energy, aeronautic and nuclear fields. Among the commonly techniques for the CFCCs production, CVI still represents the most significant one. Its main advantages are the versatility, the high quality deposits and the fact that it is conducted under mild temperature conditions. On the other hand, this technique is quite complex, therefore the set up of all process parameters needs long development time. The main purpose of the present study was to analyze the parameters controlling the CVD and CVI processes. Specifically, deposition and infiltration of SiC and Py-C tests were conducted on non-porous and porous substrates. The experiments were performed with a pilot size Isothermal/Isobaric CVI plant, designed and developed by ENEA. To guarantee the control of the process parameters, a previously optimization of the plant was needed. Changing temperature, pressure, flow rates and methane/hydrogen ratio, the Py-C deposition rate value, for an optimal fibre/matrix interphase thickness, was determined. It was also underlined the hydrogen inhibiting effect over the Py-C deposition rate. Regarding SiC morphologies, a difference between the inner and outer substrate surfaces was observed, as a consequence of a flow rate non-uniformity. In the case of the Cf/C composites development, the key parameter of the CVI process was the gas residence time. In fact, the hydrogen inhibiting effect was evident only with high value of residence time. Furthermore, lower the residence time more homogeneous the Py-C deposition rate was obtained along the reaction chamber axis. Finally, a CVD and CVI theoretical modelling was performed.

Formato

application/pdf

Identificador

http://amsdottorato.unibo.it/3882/1/Burgio_Federica_tesi.pdf

urn:nbn:it:unibo-2746

Burgio, Federica (2011) Studio del processo CVI/CVD per lo sviluppo di compositi ceramici rinforzati a fibra lunga, [Dissertation thesis], Alma Mater Studiorum Università di Bologna. Dottorato di ricerca in Chimica industriale <http://amsdottorato.unibo.it/view/dottorati/DOT213/>, 23 Ciclo. DOI 10.6092/unibo/amsdottorato/3882.

Idioma(s)

it

Publicador

Alma Mater Studiorum - Università di Bologna

Relação

http://amsdottorato.unibo.it/3882/

Direitos

info:eu-repo/semantics/openAccess

Palavras-Chave #CHIM/04 Chimica industriale
Tipo

Tesi di dottorato

NonPeerReviewed