Friction and Wear Studies of Octadecyltrichlorosilane SAM on Silicon


Autoria(s): 任嗣利; 杨生荣; 赵亚溥; Xu T; Liu WM
Contribuinte(s)

Zhou JF

Data(s)

2002

Resumo

A self-assembled monolayer of octadecyltrichlorosilane (OTS) was prepared on a single-crystal silicon wafer (111) and its tribological properties were examined with a one-way reciprocating tribometer. The worn surfaces and transfer film on the counterface were analyzed by means of scanning electron microscopy and X-ray photoelectron spectroscopy. The results show that, due to the wear of the OTS monolayer and the formation of the transfer film on the counterpart ball, the friction coefficient gradually increases from 0.06 to 0.13 with increasing sliding cycles and then keeps stable at a normal load of 0.5N. The transfer film is characterized by deposition, accumulation, and spalling at extended test duration. Though low friction coefficients of the monolayer in sliding against steel or ceramic counterfaces are recorded, poor load-carrying capacity and antiwear ability are also shown. Moreover, the monolayer itself or the corresponding transfer film on the counterface fails to lubricate even at a normal load of 1.0 N. Thus, the self-assembled monolayer of octadecyltrichlorosilane can be a potential boundary lubricant only at very low loads.

Identificador

http://dspace.imech.ac.cn/handle/311007/16431

http://www.irgrid.ac.cn/handle/1471x/1089

Idioma(s)

英语

Palavras-Chave #力学
Tipo

期刊论文