Fabrication and characterization of gold coated hollow silicon microneedle array for drug delivery
Data(s) |
2014
|
---|---|
Resumo |
In this paper, we present the fabrication and characterization of Ti and Au coated hollow silicon microneedles for transdermal drug delivery applications. The hollow silicon microneedles are fabricated using isotropic etching followed by anisotropic etching to obtain a tapered tip. Silicon microneedle of 300 mu m in height, with 130 mu m outer diameter and 110 mu m inner diameter at the tip followed by 80 mu m inner diameter and 160 mu m outer diameter at the base have been fabricated. In order to improve the biocompatibility of microneedles, the fabricated microneedles were coated with Ti (500 nm) by sputtering technique followed by gold coating using electroplating. A breaking force of 225 N was obtained for the fabricated microneedles, which is 10 times higher than the skin resistive force. Hence, fabricated microneedles can easily be inserted inside the skin without breakage. The fluid flow through the microneedles was studied for different inlet pressures. A minimum inlet pressure of 0.66 kPa was required to achieve a flow rate of 50 mu l in 2 s with de-ionized water as a fluid medium. (C) 2014 Elsevier B.V. All rights reserved. |
Formato |
application/pdf |
Identificador |
http://eprints.iisc.ernet.in/49742/1/mic_eng_128-12_2014.pdf Vinayakumar, KB and Hegde, GM and Nayak, MM and Dinesh, NS and Rajanna, K (2014) Fabrication and characterization of gold coated hollow silicon microneedle array for drug delivery. In: MICROELECTRONIC ENGINEERING, 128 . pp. 12-18. |
Publicador |
ELSEVIER SCIENCE BV |
Relação |
http://dx.doi.org/ 10.1016/j.mee.2014.05.039 http://eprints.iisc.ernet.in/49742/ |
Palavras-Chave | #Electronic Systems Engineering (Formerly, (CEDT) Centre for Electronic Design & Technology) #Centre for Nano Science and Engineering #Instrumentation and Applied Physics (Formally ISU) |
Tipo |
Journal Article PeerReviewed |