Stress and strength analysis of pin joints in laminated anisotropic plates


Autoria(s): Murthy, Aruna V; Dattaguru, B; Narayana, HVL; Rao, AK
Data(s)

1991

Resumo

Mechanical joints in composites can be tailored to achieve improved performance and better life by appropriately selecting the laminate parameters. In order to gain the best advantage of this possibility of tailoring the laminate, it is necessary to understand the influence of laminate parameters on the behaviour of joints in composites. Most of the earlier studies in this direction were based on simplified assumptions regarding load transfer at the pin-plate interface and such studies were only carried out on orthotropic and quasi-isotropic laminates. In the present study, a more rigorous analysis is carried out to study pin joints in laminates with anisotropic properties. Two types of laminates with (0/ + ?4/90)s and (0/ ± ?2/90)s layups made out of graphite epoxy T300/5208 material system are considered. The analysis mainly concentrates on clearance fit in which the pin is of smaller diameter compared to the hole. The main aspect of the analysis of pin joints is the changing contact between the pin and the plate with increasing load levels. The analysis is carried out by an iterative finite element technique and a computationally efficient routine is developed for this purpose. Numerical studies indicate that the location and magnitude of the peak stresses along the hole boundary are functions of fibre angle and the overall anisotropic properties. It is also shown that the conventional assumption of cosine distribution for the contact pressure between pin and the plate in the analysis lead to underestimation of bearing failure load and overestimation of shear and tensile failure loads in typical (0/905)s cross-ply laminates.

Formato

application/pdf

Identificador

http://eprints.iisc.ernet.in/34146/1/Stress_and_Strength_Analysis.pdf

Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1991) Stress and strength analysis of pin joints in laminated anisotropic plates. In: Composite Structures, 19 (4). pp. 299-312.

Publicador

Elsevier science

Relação

http://dx.doi.org/10.1016/0263-8223(91)90078-D

http://eprints.iisc.ernet.in/34146/

Palavras-Chave #Aerospace Engineering (Formerly, Aeronautical Engineering)
Tipo

Journal Article

PeerReviewed